Cold cutting and beveling for 24-inch pipeline tie-ins
Split-frame OCE-630 machines cut out damaged sections and prepare weld-ready bevels on live-plant pipelines where hot work permits are restricted.
Read the project
Application projects
How our machines are used on pipelines, in shipyards, vessel shops, refineries, wind tower plants and structural steel fabrication.
Featured
More projects
Double-sided plate beveling on a shipyard panel line
GMM-80R walking machines and a TMM-3000 CNC edge miller prepare K and X joints on hull plates without turning the plate over.
Heavy-plate U and J grooves for pressure vessel shells
GMMA-100L and GMMA-100U machines mill deep U and J grooves on 60–100 mm shell plate, cutting filler metal compared with a V-groove.
On-site flange face repair during a refinery shutdown
Portable TFS-I610 and TFS-I1000 flange facers restore raised faces and RTJ grooves in place, so leaking joints are fixed without replacing flanges.
Plate beveling and flange facing for wind tower sections
A TMM-3000 CNC edge miller bevels shell plates and a TFP-3000 machines large tower flanges flat after welding.
Edge rounding and slag removal before coating on structural steel
A GDM-265D removes dross from both faces of plasma-cut parts and a GCM-R3AR rounds the edges to R2 so the coating holds.
Have a similar job?
Send the material, thickness or pipe size and the bevel you need. An application engineer replies within one working day with a recommendation and quotation.